RXQ10BYM

Outdoor unit VRV Cold one - dimensional A, gas R410a – Model RXQ10BYM | Powerful, power - saving capacity

Introduction outdoor unit VRV A RXQ10BYM

outdoor unit VRV Cold one - dimensional A, model RXQ10BYM It's a high-end product of the system central air conditioning DaikinIt is notable for its powerful refrigeration, durable operation, and optimal power efficiency cooling capacity up to 95,500 Btu/h (~28.0 kW)This equipment is ideal for commercial buildings, office buildings, hotels, or large-scale commercial centers.

Key technical specifications

The outstanding advantages of outdoor unit RXQ10BYM

• ✅ Energy efficiency: outdoor unit uses modern inverter technology, which effectively reduces power consumption.

• ✅ Quiet and stable operation: With optimal design and high quality materials, the product minimizes noise during operation.

• ✅ Compact design, easy to install: Proper dimensions provide flexibility in the layout of the installation space.

• ✅ Use of environmentally friendly R410a gas: Cold gas does not harm the ozone layer, meeting modern environmental standards.

Practical Application

outdoor unit Daikin VRV RXQ10BYM suitable for many medium and large - scale works such as:

• Offices, high-rise buildings

• Hotels, resorts, shopping malls

• Hospitals, schools and factories

Why choose outdoor unit VRV A RXQ10BYM?

• High reliability from the brand Daikin

• The System central air conditioning is smart, scalable

• 🔹 Technical support and long-term maintenance

Get in touch with me right away for the best quote

If you're looking for a Efficient, economical and sustainable cooling solutions, don't ignore outdoor unit VRV A RXQ10BYMPlease contact us to receive best quote, technical assistance and consulting for appropriate system design.

🔧 1. Preparation for installation

✅ Tools and equipment required:

• Pressure gauge, line clamp

• Vacuum pump, copper pipe welder

• Clasping device, force wrench, wrench

• Standard copper pipe (L - type minimum)

• Standard electrical wires (power cable, control cable)

• Support or tripod (if installed on a roof)

✅ Check the proper placement:

• Durable, least-bearing flat 300kg (heavy load 210kg)

• Airway clearance distance:

  • Minimal 300mm side

  • Minimal 1,000mm front

  • Avoid direct sunlight and strong winds

🧱 2. Fixed outdoor unit

✅ Fixed installation:

• Place the outdoor unit on a footstool or rubber - lined concrete base.

• Secure it firmly with an expansion bolt or a specialized screw.

• Host guarantees absolute level to avoid vibrations and block failures.

🌀 3. Copper Tube Connection

✅ Copper pipe requirements:

• The correct size specified by Daikin (see model technical guidelines RXQ10BYM)

• Seal with nitrogen gas to avoid oxidizing the tube

• Insulating all gas pipes (liquid and steam pipes)

✅ Length of pipe and height:

• Total pipe length maximum: approximately 165 m (according to technical catalogue)

• Maximum height difference: 50m

• Oil separators should be installed if height exceeds 40 m

⚡ 4. Electrical Connection

✅ Sources: ------- -

• Electromagnetic 3 phase 380 V – 50 Hz

• Power line sufficiently loaded (minimum ) 4-6 mm), with grounding wire

• Breakpoint or CB separately for each outdoor unit

✅ Connect to the correct diagram:

• Compliance manufacturer's electrical diagram

• Use dedicated, jam-resistant control cables

💨 5. Vacuum & gas pump

✅ Vacuum the entire system:

• Connect the clock and pump the vacuum to the service valve

• Vacuum at least 30 minutes or until pressure < -760mm Hg

• Make sure no leaks are found with a soapy spray or gas detector

✅ Filling gas R410a (if necessary):

• Calculating the amount of gas by the actual pipe length

• Get the right gas R410a, load in liquid, do not load vapor

• Gas balance on an electronic scale

* 6. Test and verify

• Power CB on, voltage stability check

• Boot System From Central Control

• Check for current, gas pressure, noise, vibration

• Make sure no bugs are reported and the machine is stable

📋 7. Handover and instructions

• Technical instructions for customers: basic use and maintenance

• Specify installation specifications: pipe length, gas load, electrical specifications

• Send warranty cards, installation diaries and technical documents

Important Notes

• The installation must be technical unit certified by Daikin or authorized

• Installation errors can cause warranty loss, performance degradation or device crash

Do you want me to design professional installation guide PDF or diagram illustrating pipes, power and installation positions No?